镀铬黄铜英文

“铜”= copper; cuprum“黄铜”= brass; yellow brass“紫铜”= red copper; pure copper

因为我不是冶金机械专业的，所以不是很清楚你需要的究竟是那些词汇，只是正好存有一部分有色金属以及机械方面的词汇表，所以就挑选了一些。（真不是故意弄这么多的，实在是不懂这些……抱歉啊~）如果需要更多的话，就补充问题吧~钢铁的制造 Manufacturing of Steel 连续铸造法 Continuous casting process 电炉 Electric furnace 均热炉 Soaking pit 全静钢 Killed steel 半静钢 Semi-killed steel 沸腾钢(未净钢) Rimmed steel 钢铁生产流程 Steel Production Flow Chart 钢材的熔铸、锻造、挤压及延轧 The Casting, Fogging, Extrusion, Rolling & Steel 熔铸 Casting 锻造 Fogging 挤压 Extrusion 延轧 Rolling 冲剪 Drawing & stamping 特殊钢 Special Steel 简介 General 特殊钢以原素分类 Classification of Special Steel according to Element 特殊钢以用途来分类 Classification of Special Steel according to End Usage 易车(快削)不锈钢 Free Cutting Stainless Steel 含铅易车钢 Leaded Free Cutting Steel 含硫易车钢 Sulphuric Free Cutting Steel硬化性能 Hardenability 钢的脆性 Brittleness of Steel 低温脆性 Cold brittleness 回火脆性 Temper brittleness 日工标准下的特殊钢材 Specail Steel according to JIS Standard 铬钢 – 日工标准 JIS G4104 Chrome steel to JIS G4104 铬钼钢钢材 – 日工标准 G4105 62 Chrome Molybdenum steel to JIS G4105 镍铬 – 日工标准 G4102 63 Chrome Nickel steel to JIS G4102 镍铬钼钢 – 日工标准 G4103 64 Nickel, Chrome & Molybdenum Steel to JIS G4103 高锰钢铸 – 日工标准 High manganese steel to JIS standard 片及板材 Chapter Four-Strip, Steel & Plate 冷辘低碳钢片(双单光片)(日工标准 JIS G3141) 73 - 95 Cold Rolled (Low carbon) Steel Strip (to JIS G 3141) 简介 General 美材试标准的冷辘低碳钢片 Cold Rolled Steel Strip American Standard – American Society for testing and materials (ASTM) 日工标准JIS G3141冷辘低碳钢片(双单光片)的编号浅释 Decoding of cold rolled(Low carbon)steel strip JIS G3141 材料的加工性能 Drawing abillity 硬度 Hardness 表面处理 Surface finish 冷辘钢捆片及张片制作流程图表 Production flow chart cold rolled steel coil sheet 冷辘钢捆片及张片的电镀和印刷方法 Cold rolled steel coil & sheet electro-plating & painting method 冷辘(低碳)钢片的分类用、途、工业标准、品质、加热状态及硬度表 End usages, industrial standard, quality, condition and hardness of cold rolled steel strip 硬度及拉力 Hardness & Tensile strength test 拉伸测试(顺纹测试) Elongation test 杯突测试(厚度: 0.4公厘至1.6公厘，准确至0.1公厘 3个试片平均数) Erichsen test (Thickness: 0.4mm to 1.6mm, figure round up to 0.1mm) 曲面(假曲率) Camber 厚度及阔度公差 Tolerance on Thickness & Width 平坦度(阔度大于500公厘，标准回火) Flatness (width>500mm, temper: standard) 弯度 Camber 冷辘钢片储存与处理提示 General advice on handling & storage of cold rolled steel coil & sheet 防止生锈 Rust Protection 生锈速度表 Speed of rusting 焊接 Welding 气焊 Gas Welding 埋弧焊 Submerged-arc Welding 电阻焊 Resistance Welding 冷辘钢片(拉力: 30-32公斤/平方米)在没有表面处理状态下的焊接状况 Spot welding conditions for bared (free from paint, oxides etc) Cold rolled mild steel sheets(T/S:30-32 Kgf/ μ m2) 时间效应(老化)及拉伸应变 Aging & Stretcher Strains 日工标准(JIS G3141)冷辘钢片化学成份 Chemical composition – cold rolled steel sheet to JIS G3141 冷辘钢片的"理论重量"计算方程式 Cold Rolled Steel Sheet – Theoretical mass 日工标准(JIS G3141)冷辘钢片重量列表 Mass of Cold-Rolled Steel Sheet to JIS G3141 冷辘钢片订货需知 Ordering of cold rolled steel strip/sheet 其它日工标准冷轧钢片(用途及编号) JIS standard & application of other cold Rolled Special Steel 电镀锌钢片或电解钢片 Electro-galvanized Steel Sheet/Electrolytic Zinc Coated Steel Sheet 简介 General 电解/电镀锌大大增强钢片的防锈能力 Galvanic Action improving Weather & Corrosion Resistance of the Base Steel Sheet 上漆能力 Paint Adhesion 电镀锌钢片的焊接 Welding of Electro-galvanized steel sheet 点焊 Spot welding 滚焊 Seam welding 电镀锌(电解)钢片 Electro-galvanized Steel Sheet 生产流程 Production Flow Chart 常用的镀锌钢片(电解片)的基层金属、用途、日工标准、美材标准及一般厚度 Base metal, application, JIS & ASTM standard, and Normal thickness of galvanized steel sheet 锌镀层质量 Zinc Coating Mass 表面处理 Surface Treatment 冷轧钢片 Cold-Rolled Steel Sheet/Strip 热轧钢片 Hot-Rolled Sheet/Strip 电解冷轧钢片厚度公差 Thickness Tolerance of Electrolytic Cold-rolled sheet 热轧钢片厚度公差 Thickness Tolerance of Hot-rolled sheet 冷轧或热轧钢片阔度公差 Width Tolerance of Cold or Hot-rolled sheet 长度公差 Length Tolerance 理论质量 Theoretical Mass 锌镀层质量(两个相同锌镀层厚度) Mass Calculation of coating (For equal coating)/MM 锌镀层质量(两个不同锌镀层厚度) Mass Calculation of coating (For differential coating)/MM 镀锡薄铁片(白铁皮/马口铁) (日工标准 JIS G3303) 简介 General 镀锡薄铁片的构造 Construction of Electrolytic Tinplate 镀锡薄钢片(白铁皮/马日铁)制造过程 Production Process of Electrolytic Tinplate 锡层质量 Mass of Tin Coating (JIS G3303-1987) 两面均等锡层 Both Side Equally Coated Mass 两面不均等锡层 Both Side Different Thickness Coated Mass 级别、电镀方法、镀层质量及常用称号 Grade, Plating type, Designation of Coating Mass & Common Coating Mass 镀层质量标记 Markings & Designations of Differential Coatings 硬度 Hardness 单相轧压镀锡薄铁片(白铁皮/马口铁) Single-Reduced Tinplate 双相辗压镀锡薄钢片(马口铁/白铁皮) Dual-Reduction Tinplate 钢的种类 Type of Steel 表面处理 Surface Finish 常用尺寸 Commonly Used Size 电器用硅 [硅] 钢片 Electrical Steel Sheet 简介 General 软磁材料 Soft Magnetic Material 滞后回线 Narrow Hystersis 矫顽磁力 Coercive Force 硬磁材料 Hard Magnetic Material 最大能量积 Maximum Energy Product 硅含量对电器用的低碳钢片的最大好处 The Advantage of Using Silicon low Carbon Steel 晶粒取向(Grain-Oriented)及非晶粒取向(Non-Oriented) Grain Oriented & Non-Oriented 电器用硅 [硅] 钢片的最终用途及规格 End Usage and Designations of Electrical Steel Strip 电器用的硅 [硅] 钢片之分类 Classification of Silicon Steel Sheet for Electrical Use 电器用钢片的绝缘涂层 Performance of Surface Insulation of Electrical Steel Sheets 晶粒取向电器用硅钢片主要工业标准 International Standard – Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use 晶粒取向电器用硅钢片 Grain-Oriented Electrical Steel 晶粒取向，定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数(日工标准及美材标准) Magnetic Properties and Lamination Factor of SI-ORIENT-CORE& SI-ORIENT-CORE-HI B Electrical Steel Strip (JIS and AISI Standard) 退火Annealing 电器用钢片用家需自行应力退火原因 Annealing of the Electrical Steel Sheet 退火时注意事项 Annealing Precautionary 碳污染 Prevent Carbon Contamination 热力应先从工件边缘透入 Heat from the Laminated Stacks Edges 提防过份氧化 No Excessive Oxidation 应力退火温度 Stress –relieving Annealing Temperature 晶粒取向电器用硅 [硅] 钢片 – 高硼(HI-B)定取向芯钢片及定取向芯钢片之机械性能及夹层系数 Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets 晶粒取向电器用硅 [硅] 钢;片 – 高硼低硫(LS)定取向 钢片之磁力及电力性能 Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-LS 晶粒取向电器用硅 [硅] 钢片 – 高硼低硫(LS) 定取向钢片之机械性能及夹层系数 Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B-LS 晶粒取向电器用硅(硅)钢片-高硼(HI-B)定取向 芯钢片，定取向芯钢片及高硼低硫(LS)定取向芯钢片之厚度及阔度公差 Physical Tolerance of SI-ORIENT-CORE-HI-B, SI-ORIENT-CORE, & SI-CORE-HI-B-LS Grain Oriented Electrical Steel Sheets 晶粒取向电器用硅(硅)钢片 – 高硼(HI-B)定取向 芯钢片，定取向芯钢片及高硼低硫(LS)定取向芯钢片之标准尺寸及包装 Standard Forms and Size of SI-ORIENT-CORE-HI-B,SI-CORE, & SI-ORIENT-CORE-HI-B-LS Grain- Oriented Electrical Steel Sheets 绝缘表面 Surface Insulation 非晶粒取向电力用钢片的电力、磁力、机械性能 及夹层系数 Lamination Factors of Electrical, Magnetic & Mechanical Non-Grain Oriented Electrical 电器及家电外壳用镀层冷辘 [低碳] 钢片 Coated (Low Carbon) Steel Sheets for Casing,Electricals & Home Appliances 镀铝硅钢片 Aluminized Silicon Alloy Steel Sheet 简介 General 镀铝硅合金钢片的特色 Feature of Aluminized Silicon Alloy Steel Sheet 用途 End Usages 抗化学品能力 Chemical Resistance 镀铝(硅)钢片 – 日工标准(JIS G3314) Hot-aluminum-coated sheets and coils to JIS G 3314 镀铝(硅)钢片 – 美材试标准(ASTM A-463-77)35.7 JIS G3314镀热浸铝片的机械性能 Mechanical Properties of JIS G 3314 Hot-Dip Aluminum-coated Sheets and Coils 公差 Size Tolerance 镀铝(硅)钢片及其它种类钢片的抗腐蚀性能比较 Comparsion of various resistance of aluminized steel & other kinds of steel 镀铝(硅)钢片生产流程 Aluminum Steel Sheet, Production Flow Chart 焊接能力 Weldability 镀铝钢片的焊接状态(比较冷辘钢片) Tips on welding of Aluminized sheet in comparasion with cold rolled steel strip 钢板 Steel Plate 钢板用途分类及各国钢板的工业标准包括日工标准及美材试标准 Type of steel Plate & Related JIS, ASTM and Other Major Industrial Standards 钢板生产流程 Production Flow Chart 钢板订货需知 Ordering of Steel Plate 不锈钢 Stainless Steel 不锈钢的定义 Definition of Stainless Steel 不锈钢之分类，耐腐蚀性及耐热性 Classification, Corrosion Resistant & Heat Resistance of Stainless Steel 铁铬系不锈钢片 Chrome Stainless Steel 马氏体不锈钢 Martensite Stainless Steel 低碳马氏体不锈钢 Low Carbon Martensite Stainless Steel含铁体不锈钢 Ferrite Stainless Steel 镍铬系不锈钢 Nickel Chrome Stainless Steel 释出硬化不锈钢 Precipitation Hardening Stainless Steel 铁锰铝不锈钢 Fe / Mn / Al / Stainless Steel 不锈钢的磁性 Magnetic Property & Stainless Steel 不锈钢箔、卷片、片及板之厚度分类 Classification of Foil, Strip, Sheet & Plate by Thickness 表面保护胶纸 Surface protection film 不锈钢片材常用代号 Designation of SUS Steel Special Use Stainless 表面处理 Surface finish 薄卷片及薄片(0.3至2.9mm厚之片)机械性能 Mechanical Properties of Thin Stainless Steel(Thickness from 0.3mm to 2.9mm) – strip/sheet 不锈钢片机械性能(301, 304, 631, CSP) Mechanical Properties of Spring use Stainless Steel 不锈钢 – 种类，工业标准，化学成份，特点及 主要用途 Stainless Steel – Type, Industrial Standard, Chemical Composition, Characteristic & end usage of the most commonly used Stainless Steel 不锈钢薄片用途例 End Usage of Thinner Gauge 不锈钢片、板用途例 Examples of End Usages of Strip, Sheet & Plate 不锈钢应力退火卷片常用规格名词图解 General Specification of Tension Annealed Stainless Steel Strips 耐热不锈钢 Heat-Resistance Stainless Steel 镍铬系耐热不锈钢特性、化学成份、及操作温度 Heat-Resistance Stainless Steel 铬系耐热钢 Chrome Heat Resistance Steel 镍铬耐热钢 Ni - Cr Heat Resistance Steel 超耐热钢 Special Heat Resistance Steel 抗热超级合金 Heat Resistance Super Alloy 耐热不锈钢比重表 Specific Gravity of Heat – resistance steel plates and sheets stainless steel 不锈钢材及耐热钢材标准对照表 Stainless and Heat-Resisting Steels 高碳钢片 High Carbon Steel Strip 分类 Classification 用组织结构分类 Classification According to Grain Structure 用含碳量分类 – 即低碳钢、中碳钢及高碳钢 Classification According to Carbon Contains 弹簧用碳钢片 CarbonSteel Strip For Spring Use 冷轧状态 Cold Rolled Strip 回火状态 Annealed Strip 淬火及回火状态 Hardened & Tempered Strip/ Precision – Quenched Steel Strip 贝氏体钢片 Bainite Steel Strip 弹簧用碳钢片材之边缘处理 Edge Finished 淬火剂 Quenching Media 碳钢回火 Tempering 回火有低温回火及高温回火 Low & High Temperature Tempering 高温回火 High Temperature Tempering 退火 Annealing 完全退火 Full Annealing 扩散退火 Diffusion Annealing 低温退火 Low Temperature Annealing 中途退火 Process Annealing 球化退火 Spheroidizing Annealing 光辉退火 Bright Annealing 淬火 Quenching 时间淬火 Time Quenching 奥氏铁孻回火 Austempering 马氏铁体淬火 Marquenching 高碳钢片用途 End Usage of High Carbon Steel Strip 冷轧高碳钢 – 日本工业标准 Cold-Rolled (Special Steel) Carbon Steel Strip to JIS G3311 电镀金属钢片 Plate Metal Strip 简介 General 电镀金属捆片的优点 Advantage of Using Plate Metal Strip 金属捆片电镀层 Plated Layer of Plated Metal Strip 镀镍 Nickel Plated 镀铬 Chrome Plated 镀黄铜 Brass Plated 基层金属 Base Metal of Plated Metal Strip 低碳钢或铁基层金属 Iron & Low Carbon as Base Metal 不锈钢基层金属 Stainless Steel as Base Metal 铜基层金属 Copper as Base Metal 黄铜基层金属 Brass as Base Metal 轴承合金 Bearing Alloy