由卖方承担英文

CFR贸易术语指成本加运费（……指定目的港）。

在按CFR贸易术语成交时，价格构成中不包括保险费。也就是说买方要自费投保并支付保险费用。其余关于交货地点、买卖双方的责任、费用均与CIF术语相同。在CFR合同中，买方要自行投保，因此和FOB合同的情况一样，卖方要给买方货物装船的充分通知，否则由此造成买方漏保货运险引起的损失应由卖方负责。

扩展资料：

注意事项：

cfr方式中，卖方向买方发出已装船通知，具有通知买方及时办理保险的作用。买方办理进口货物保险时，保险公司按有关的装船通知承保。如果卖方未能及时向买方发出已装船通知。

致使买方未能及时办理保险，则万一货物在运输途中发生灭失或损坏，其风险仍由卖方承担。所以cfr方式中，卖方应特别注意及时向买方发出装船通知。

参考资料来源：百度百科-CFR

卖方承担责任、费用和风险最大的一种贸易术语是DDP，DDP英文全称Delivered Duty Paid（named place of destina-tion)。中文名称税后交货（……指定目的港）。“完税后交货（……指定目的地）”是指卖方在指定的目的地，办理完进口清关手续，将在交货运输工具上尚未卸下的货物交与买方，完成交货。卖方必须承担将货物运至指定的目的地的一切风险和费用，包括在需要办理海关手续时在目的地应交纳的任何“税费”（包括办理海关手续的责任和风险，以及交纳手续费、关税、税款和其他费用）。但是，如当事方希望将任何进口时所要支付的一切费用（如增值税）从卖方的义务中排除，则应在销售合同中明确写明。 若当事方希望买方承担进口的风险和费用，则应使用DDU术语。该术语适用于各种运输方式，但当货物在目的港船上或码头交货时，应使用DAP术语。

FOB: 是Free on Board 或 Freight on Board 的英文缩写,其中文含义为“装运港船上交货（....指定装运港）”。使用该术语，卖方应负责办理出口清关手续，在合同规定的装运港和规定的期限内，将货物交到买方指派的船上，承担货物在装运港越过船舷之前的一切风险，并及时通知买方。CIF: 即”Cost Insurance and Freight" 的英文缩写，其中文含义为“成本加保险费、运费”。使用该术语，卖方负责按通常条件租船订舱并支付到目的港的运费，在合同规定的装运港和装运期限内将货物装上船并负责办理货物运输保险，支付保险费。CNF=C&F：即“Cost and Freight" 的英文缩写，其中文含义为”成本加运费“使用该术语，卖方负责按通常的条件租船订舱并支付到目的港的运费，按合同规定的装运港和装运期限将货物装上船并及时通知买家。CRF(Clean Report of Finding)：验证报告书。需要ITS验货的东西。ITS会在收齐所有的最终单据后3个工作日内，发印此书，并在最终发票和清单上背书。

中国进出口企业在线服务中心提示：DDP术语下卖方承担最大责任，要承担货物到达目的地的一切费用和风险．．DDP 完税后交货 delivered duty paid “完税后交货（……指定目的地）”是指卖方在指定的目的地，办理完进口清关手续，将在交货运输工具上尚未卸下的货物交与买方，完成交货。卖方必须承担将货物运至指定的目的地的一切风险和费用，包括在需要办理海关手续时在目的地应交纳的任何“税费”（包括办理海关手续的责任和风险，以及交纳手续费、关税、税款和其他费用）。

The seller's responsibility and obligation 2.1 to ensure that the seller of this contract, according to the contract requirements in a timely manner to the right to carry out its responsibilities and obligations of the contract until the completion of the mission. 2.2 The seller of the contract supplier of equipment within the framework of the manufacturing process technology. The main components of the selection of materials. Outside of the main pieces of matching the quality. The quality of the equipment supplier. Supplier of equipment reliability and integrity.'s Equipment delivery to the buyer In charge. If the seller due to the errors suppliers reasons, the seller should be followed up with the timely and correct, the economic losses caused by the seller to bear. 2.3 In accordance with the buyer or the seller should be designated owner and design technical parameters and requirements for the design of equipment and facilities in accordance with the technical requirements for equipment manufacturing and information technology standards for manufacturing and testing. 2.4 The seller should be based on the terms of the contract the scope of supply and delivery progress of the buyer to provide quality equipment and services, and by 2 years to provide preferential market price of spare parts. 2.5 the seller under the contract should be asked to participate in the commissioning of the equipment contract. Commissioning. Load testing and inspection equipment such as the handover, and to send experienced technicians to carry out technical services, to address the issue. In the meantime, the seller should send a relatively fixed and, if adjusted, with the consent of the buyer's consent before they are allowed to adjust the personnel. If the seller in the implementation of technical services, technical guidance and led to the failure of the contract to install equipment, test and debug the failure of the work, resulting in project delays or rework, the buyer for losses caused by the seller to bear. 2.6 by the seller for equipment and components. Supporting parts or pieces, such as less than standard of acceptance by the buyer in the agreement, the seller should be repaired in a timely manner. Replacement; if there are some omissions should be added in a timely manner. Resulting from the seller to bear the loss. 2.7 The main equipment contracts in the factory before the seller in the factory pre-installed equipment. 2.8 In addition to the clear provisions of this contract, the seller in the procurement of items outside the package, the buyer should be consulted and approved by the buyer only after the purchase, if necessary, co-organized plant inspection to confirm the election. 2.9 deal with the seller or buyer to provide technical drawings of confidential information, without allowing the buyer may not be transferred to any other third party liability arising from the seller is responsible. 2.10 seller to the buyer must provide the equipment manufacturing factory in the processing, can not subcontract. Assignment of the contract. 2.11 pair of the implementation of the contract the seller to the buyer of the persons concerned, the seller should provide the work. The convenience of their daily life. 2.12 Sellers have to protect the buyer in the use of their goods. And its services are not part of any third party regarding patent infringement. Trademark or industrial design rights charges. If any third-party infringement allegations made, the seller shall negotiate with third parties and hence to assume all liability and costs. 2.13 pair of related to personal and environmental protection equipment and special equipment, such as equipment, pressure vessels. Fire-fighting equipment. Electronic alarm and explosion-proof electrical equipment, such as belonging to the seller of the scope of supply, according to the national authorities of relevant laws and regulations, the seller to provide Permits for the use of the information required by the seller to the relevant state department in charge of inspection, and apply for the permit. 2.14 seller to the buyer of the equipment on a contract to provide monthly progress of each month.