一体模具的英文

看是哪种类型的模具。塑料类产品的模具一般是mould或者mold。冲压模这类的一般是die。还有有些国家说 toolings也很多。

Any materials or components which are found to be wet MUST NOT been used for production. Should the local QA Inspector find that wet materials or components have been used for production items will be immediately selected for random lab testing to detect any mold contamination. The cost of such lab testing will be borne by the Vendor.一旦发现任何材料或者零件是潮湿的就不能被用于生产。本地（工厂）的质量检验员发现了潮湿的材料或者零件被用于生产，那必须马上随即挑选一些产品在实验室做测试，去确认一下有没有任何的模具污染。这些实验的费用必须用供应商承担。All finished production must be covered and sealed to avoid contamination with dust. The covered or sealed finished production must be stored at least 5” / 12cm above the floor on a wooden pallet which allows the air to circulate freely around the stored items.所有的成品必须加上盖子并且密封去避免灰尘的污染，并且必须储存在离地5英尺/ 12公分的木质货盘上，这样空气就可以在储存产品的周围自由循环Finished production which is packed into export cartons prior to shipping must be stored in an area where air will circulate freely. Electric fans should be used to assist the movement of air and, if possible, the factory should consider the installation of air-conditioning systems in these areas.那些被包装在纸箱内准备出口的成品，事先必须储存在空气可以自由流通的区域，并应开电风扇去帮助这个区域的空气的流通，如果可以的话，工厂应该考虑在这些区域安装空调系统希望对你有用！

Provincial process, save manpower cost: out of the mould processing without province mode, can be directly used for polishing production, saving personnel to improve efficiency.

3.saving procedures and labour:moulds finished without polishing,used directly in manufacturing, work force saving and effieiency improvement.

水平有限O(∩_∩)O~，只能翻译到这个地步了···如果可能的话，自然冷却最好。如果使用冷却装置冷却，首先要保证大门整夜敞开以保障通风。这样将避免积水进入或环绕在隧道周围。7.模具保护标签（Micro-Pak 标签）在Silica Gel，模具保护标签，一种交易名称为Micro-Pak的标签可以被使用。每双鞋子的一个Micro-Pak标签，或者每双靴子的一对标签，应该被放置在每个鞋盒里边。如果鞋靴是被分装在单独的塑料袋里，那么Micro-pak PE单应该被分别放在每个对应的鞋靴的塑料袋内，而不是放在在鞋盒里。