Hardware spray processes: Workpiece polishing to make up for sub-Cement, polishing, spray cleaning, manual removal, automatic dust removal, paint spraying, cold flat, baking, the next thing to check (in addition to non-performing), automatic dust removal, paint spraying, baking, the next parts inspection and packaging. Various processes to be the time spent by the total length of line, managerial and technical strength of a constant, by a single operator, from the beginning to the end of the general process in two hours to make up for sub-Nai, when accounting for the maximum polished, calm and dry cold bake 6-12 m / min by 9-15 meters.
五金件喷漆的工艺流程:the flowchart of hardware painting 工件抛光: work piece polishing; 补坭子: badigeon/lacquer/putty/filler; 打磨: grinding; 喷淋清洁: cleaning; 手动除尘: manual dedusting; 自动除尘: auto dedusting; 喷底漆priming; 冷流平:cold-flow; 烘烤: drying; 下件检查(除不良): inspection; 喷面漆: finishing; 包装: packing.始到结束一般在两个小时以内,补坭子、打磨占时最长,冷流平和烘烤6-12米/分钟乘9-15米。Generally, it takes less than two hours, among that putty and grinding use longer period. The cold-flow and drying are 6-12 meters per minute and 9-15 meters per minute respectively.提问的朋友,你好。这是百度全体朋友为你的贡献。 谢谢前面第一位朋友的中文文字。 再有不清楚的地方或不足,可以继续提问。
一.将1~5与A~E配对 1.bribe ----E贿赂2.polish ---A打磨、磨3.yell--- B大叫4.flatter ---C奉承5.shut one's eyes to sth ----D睁只眼闭只眼二.将第一题中的1~5以正确形式填入句子横线处 1.He(yelled)at the child to get down from the wall 2.Are you trying to_(flatter)me ?it is no easy job 3.He ie said to have taken(bribe)while in office and he is now in trouble 4.I can't(shut my eyes to)his mistake 5.He often(polishes)his glasses with a hankerchief
五金件喷漆的工艺流程: 工件抛光、补坭子、打磨、喷淋清洁、手动除尘、自动除尘、喷底漆、冷流平、烘烤、下件检查(除不良)、自动除尘、喷面漆、烘烤、下件检查、包装。 各个流程的需花的时间按产线总长度、管理和技术力量恒定,按单件算,从工艺开始到结束一般在两个小时以内,补坭子、打磨占时最长,冷流平和烘烤6-12米/分钟乘9-15米。翻译如下:Hardware spray processes: Workpiece polishing to make up for sub-Cement, polishing, spray cleaning, manual removal, automatic dust removal, paint spraying, cold flat, baking, the next thing to check (in addition to non-performing), automatic dust removal, paint spraying, baking, the next parts inspection and packaging. Various processes to be the time spent by the total length of line, managerial and technical strength of a constant, by a single operator, from the beginning to the end of the general process in two hours to make up for sub-Nai, when accounting for the maximum polished, calm and dry cold bake 6-12 m / min by 9-15 meters.