(apply light coat of oil to seal od (item 8) prior to assembly into housing.)在组装入库前需对油封外径上(项目8)轻涂一层油。(防锈用的,油封嘛)2、 (apply permatex #68025 (green) to seal od's(item 7 and 25) and freeze plugs (items 5 and 10) prior to assembly)在组装前,在油封外径(项目7和25)和防冻塞(项目5和10)上装绿色的permatex #68025。3、 (apply oil film to seal lips and mating diameters prior to assembly-3 places.)在3件安装之前,在密封唇和对接径上装油膜。4、 (after installing bearing(item 2) and snap ring(item 27)into ring gear(item 6).apply mobll temp 78 grease(2.5oz)to tooth area of ring gear and ball brg. 在把弹簧卡环(项目27)和轴承(项目2)装入齿轮(项目6)之后,在齿轮的轮齿区域和滚珠支座区域上美孚高级润滑脂78号(2.5oz)。5、 Apply permatex #24225 thread locker on threads of items :13,21,22,32,33,36.在螺丝项目的13,21,22,32,33和36上上permatex #24225的螺丝胶。6、 Apply mobil temp 78 grease into bearing(item 2) cavities prior to seal.assembly(item 7)and into both open bearings(item 3) prior to assembly.在油封组装之前,在轴承腔内(项目2)上美孚高级润滑油78号。在组装之前,在两个外露轴承(项目3)上美孚高级润滑油78号。7、 Apply mobil temp 78 grease(4.0 oz)into gear pocket prior to gasket assembly.在衬垫安装之前,在齿轮窝处上美孚高级润滑油78号(4.0oz)。8、 Apply light coat of oil to o-ring(item 26)prior to wheel assembl(item 31).在轮子(项目31)安装之前,在O型圈(项目26)上轻涂油一层油。9、 Torque grade 12.9 m6 bolts(item 13) to 125-135 pound-inches(14.1-15.3n-m). 螺栓转紧力矩12.6,M6螺栓(项目13)125-135寸磅(14.1-15.3n-m)哈哈哈哈哈~~